Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Burbank?
Panel replacement in Burbank typically runs $250 – $500 for a single section, with most homeowners landing around $325 – $400 once labor, disposal, and color-matching are included. A single dented bottom panel on a standard steel door is usually a same-day job; a full section swap on a custom wood or carriage-style door can push toward the top of the range or beyond. That $250 – $500 lead range covers the vast majority of single-panel work we handle in Burbank, from Magnolia Park bungalows to the hillside homes up past Kenneth Road.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers actually break down for Burbank homeowners this year. These ranges reflect what we quote on real jobs, not national averages pulled from a template.
| Line Item | Typical Burbank Range |
|---|---|
| Single steel panel (bottom section, most common) | $250 – $350 |
| Single panel on a mid-range insulated door | $300 – $420 |
| Single panel on a wood or carriage-style door | $380 – $500 |
| Labor (removal, install, realignment) | $90 – $150 |
| Color/finish matching (factory-order panel) | $40 – $120 |
| Disposal of old panel | $25 – $50 |
| Track or hinge adjustment (if needed with panel) | $120 – $240 |
| Roller replacement (often done same visit) | $110 – $220 |
What pushes a job toward the top of that $250 – $500 range? Factory color matching on an older door, a panel that’s no longer in production (which means a custom order or a full-section replacement), and any hidden damage to tracks or hinges discovered once the old panel comes off. What keeps it near the bottom? A standard white steel bottom panel on a common brand like Clopay or Amarr that we can source quickly and install in a single visit. See our Panel Replacement in Burbank page for the full scope of what a panel job involves.
What Affects Panel Replacement Pricing in Burbank
- Door brand and panel availability. If your door is a Clopay, Amarr, Wayne Dalton, or Raynor, we can usually source a matching panel without much fuss. An older or discontinued model may require a custom order, which adds cost and lead time.
- Panel position. Bottom panels take the most abuse – they’re the ones that meet the driveway, the curb, and Burbank’s dry, dusty summers. They’re also the least expensive to replace. A middle or top panel that’s been damaged by a misaligned track or a stray basketball costs more because it involves more disassembly.
- Material. Standard 24-gauge steel is the value play. Insulated steel panels cost more but help with heat and noise, which matters in west Burbank homes that catch full afternoon sun. Wood and composite carriage panels sit at the top of the range.
- Color and finish matching. Burbank’s older housing stock – lots of 1920s – 1950s bungalows in Magnolia Park and Rancho Equestrian – often has doors in colors that aren’t current factory standards. We can get close, but exact matching on a sun-faded door sometimes means ordering a factory panel rather than pulling one off the shelf.
- Hidden damage underneath. A dented panel is usually just a dented panel. But if a car backed into the door or a tree limb came down, the tracks, hinges, and rollers behind that panel often need attention too. We price the panel first, then flag anything else we find.
- Whether the door is under warranty. Some door brands cover panel defects for a period after installation. If you’re still inside that window, the panel itself may cost you nothing – you’d only pay labor and disposal.
How to Save on Panel Replacement
A few practical ways to keep a Burbank panel job near the bottom of the $250 – $500 range:
- Fix the bottom panel before the damage spreads. A small dent or rust spot on the bottom section is cheap to address. Once water gets behind the finish or a hinge starts pulling loose, the adjacent panels and hardware get involved and the price climbs.
- Ask about sourcing a factory-matched panel instead of a full door replacement. If the rest of your door is structurally sound, a single panel swap is almost always the lower-cost move. A full new door installation runs $700 – $2,200, so it’s worth confirming whether a panel alone solves the problem.
- Bundle small jobs on the same visit. If your rollers are worn or a hinge is squeaking, having us handle it during the panel job usually costs less than a separate trip. Roller replacement alone runs $110 – $220.
- Get a written estimate before any work starts. We quote the panel, labor, and disposal up front so there are no surprises. Free estimates are standard for us – call (833) 589-9142 to schedule one.
- Check your homeowner’s insurance for impact damage. If a vehicle or falling limb caused the damage, the panel replacement may be partially covered. Worth a call to your agent before you book the repair.
Why Burbank Doors Take a Beating (and Why That Affects Panel Cost)
Burbank sits in a pocket of the San Fernando Valley where summer heat routinely climbs past 100°F and the dry season runs long. That combination is hard on garage doors. Steel panels expand and contract through those temperature swings, and the factory finish on older doors eventually cracks – usually at the bottom, where dust and sun do the most work. We see a steady stream of panel calls from Magnolia Park and the streets around Verdugo Park after the first hot stretch of the year, when a finish that held through spring finally gives up. The homes closer to the Verdugo Mountains also catch more wind-driven debris, which is how a lot of bottom panels in the hillside neighborhoods end up with a dent or a bent hinge.
That doesn’t mean every Burbank door needs a panel. We diagnose first – some “dented panel” calls turn out to be a track that’s out of alignment, which is a much cheaper fix. Track realignment runs $120 – $240. If you’re not sure what you’re looking at, describe the damage and we’ll tell you whether it’s a panel job or something simpler.
Repair or Replace? How to Decide
The honest answer: if it’s one damaged panel on an otherwise healthy door, repair almost always wins on cost. The math changes when the damage is spread across multiple sections. A $250 – $350 bottom panel on a door that’s otherwise in good shape is a clear repair. But if you’re looking at two or three damaged panels on a door that’s also got worn springs, tired rollers, and a track that’s seen better days, the combined repair bill can approach the low end of a new door – and a new door comes with a warranty and modern insulation.
Our rule of thumb for Burbank homeowners: if the panel repair plus any required hardware comes in under about half the cost of a new installation, repair. If it’s above that, it’s worth pricing a replacement before you commit. We’ll give you both numbers so you can decide with real figures instead of a guess. A new door installation in Burbank runs $700 – $2,200 depending on material and size. Garage door repair as a broader category runs $150 – $600. If you’re also dealing with a panel that’s come loose because an opener pulled it out of alignment, the opener side may need attention too – dedicated opener repair runs $120 – $320, and new opener installation runs $250 – $550.
Do You Work on All Garage Door Brands?
We work on the eight brands that cover the vast majority of doors and openers Burbank homeowners actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand range is why panel sourcing usually isn’t a problem for us – we know which panels are currently available, which have been discontinued, and where to find a match when the factory no longer makes your exact part. It’s also why we can tell you up front whether a panel replacement is even the right call, rather than ordering a part and hoping it fits.
The same bench strength covers the rest of the system. Opener repair is its own dedicated service here, not a footnote to general door repair, because openers are the component that fails most often. And because we handle repair, opener repair, and full installation under one name, you’re not sent to a second contractor if a panel job turns into something larger. One call covers it. Head back to our home page for the full picture of what we do across Burbank and the surrounding Valley.
What Should You Check Before Calling for a Panel Estimate?
A few minutes of prep makes the estimate faster and more accurate:
- Snap a photo of the damage. Include the affected panel and a shot of the door from outside so we can see the full layout.
- Note the door brand if you can see it. Check the edge of the door or the owner’s manual – knowing it’s a Clopay vs. an Amarr helps us quote accurately.
- Test the door with the opener disconnected. Pull the release cord and lift the door by hand. If it feels heavy or binds, there may be spring or track issues on top of the panel damage. If it feels dangerous to move, stop and leave it.
- Look for rust or cracking at the bottom edge. Rust streaks or flaking paint usually signal a finish failure that’s about to become a panel problem.
- Have your address and door dimensions ready. Panel pricing depends on width and height, and Burbank’s mix of single-car and two-car garages means door sizes vary block to block.
A Safety Note on Garage Door Panels and Springs
Panel replacement itself is mostly a mechanical job, but the springs and cables that lift the door are under high tension – and those are not a DIY project. If a panel is damaged because a spring snapped or a cable came loose, don’t try to lift the door by hand or disconnect anything to “make it work” until we’ve looked at it. A door that’s lost its spring tension can come down hard and fast, and a cable under load can cause serious injury. Leave the high-tension work to a trained technician. We’ll tell you clearly if a panel job is safe to schedule as-is or if the lifting hardware needs attention first.
FAQs – Panel Replacement Cost
How much does garage door panel replacement cost in Burbank?
Panel replacement in Burbank costs $250 – $500 for a single section, with most jobs landing around $325 – $400 once labor, disposal, and color matching are included. The exact price depends on the door brand, panel material, and whether any track or hinge work is needed. Call (833) 589-9142 for a free, written estimate on your specific door.
Is it cheaper to repair a garage door panel or replace the whole door?
Repairing a single panel ($250 – $500) is almost always cheaper than replacing the whole door ($700 – $2,200). The math only tilts toward replacement when multiple panels are damaged and the door’s hardware is also worn out. We’ll quote both so you can compare real numbers. Call (833) 589-9142 to schedule a free estimate.
Can you come today to look at a damaged panel?
Often, yes. Panel damage that leaves the door stuck or partially hanging is worth a same-day call, and many single-panel jobs in Burbank are completed in one visit. Availability depends on the day and the parts needed, so call (833) 589-9142 and we’ll tell you honestly whether we can get out today.
How long does panel replacement take?
A standard single steel panel takes about an hour to 90 minutes on site, depending on whether the door needs realignment. A custom wood or carriage panel may take longer, especially if the replacement has to be factory-ordered. Most Burbank jobs are done in a single visit. Call (833) 589-9142 to get an accurate time estimate for your door.
Will my homeowner’s insurance cover a damaged garage door panel?
Sometimes. If the damage came from a covered event – a vehicle impact, a falling limb, vandalism – your policy may cover part or all of the panel replacement. It’s worth a call to your agent before you book the job. If you decide to proceed, call (833) 589-9142 and we’ll get you a written estimate you can submit with a claim.
Get a Free Panel Replacement Estimate
If your Burbank garage door has a dented, rusted, or damaged panel, we’ll come out, look at the door, and give you a straight answer on whether a panel swap is the right move – and what it’ll cost. No pressure, no upsell. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and we handle repair, opener repair, and full installation under one name. Call Anchor Garage Door Repair at (833) 589-9142 for a free estimate. Steady, start to finish.
Pricing reflects the Burbank market as of 2026. Anchor Garage Door Repair offers free estimates – call (833) 589-9142.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Jeff Hoffman"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Lucia Flores"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Vivian Wong