Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Burbank?
Garage Door Installation services in Burbank typically run $700 to $2,200 for the door and hardware, with most single-car replacements landing near the lower end and double-car doors with openers near the top. A standard single door with basic hardware usually falls in the $700 to $1,200 range, while a double door with a new opener and premium panels pushes toward $1,800 to $2,200. If you want an exact number for your door size and opening, we’ll come out and measure it – estimates are free.
That top-line range covers the door itself, tracks, springs, rollers, and standard installation labor. It does not include a new opener, which is priced separately at $250 to $550 installed. Most Burbank homeowners we work with are replacing a door that’s 15 to 30 years old, and the price question almost always comes down to door style, size, and whether the old track and springs can be reused. They usually can’t – and we’ll tell you straight when they can’t, rather than pad the bill.
Key Takeaways
- Typical installed cost for a new garage door in Burbank: $700 to $2,200.
- Opener installation, if you’re adding one, runs $250 to $550.
- Single-car doors sit at the low end; double doors with premium panels sit at the high end.
- A free on-site estimate is the only way to price your exact opening and door style.
- We work on every major brand – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so the door and opener don’t have to match what we sell.
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers break down for the Burbank market. These ranges reflect what we see on real jobs in the city, not national averages pulled from a calculator.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| New door installation (single-car) | $700 – $1,200 | Standard steel or basic wood panel door, standard height |
| New door installation (double-car) | $1,200 – $2,200 | Wider opening, heavier door, premium panel styles at the top |
| Opener installation | $250 – $550 | Belt or chain drive; smart openers and battery backup at the higher end |
| Spring repair (if reusing an existing door’s hardware) | $180 – $340 | Torsion or extension spring replacement |
| Cable repair | $130 – $250 | Frayed or snapped lift cables |
| Panel replacement | $250 – $500 | Single damaged section, rather than a full door |
| Track realignment | $120 – $240 | Bent or out-of-square tracks |
| Roller replacement | $110 – $220 | Noisy or worn nylon/steel rollers |
| General repair call (any single fix) | $150 – $600 | Depends on the part and how much disassembly is needed |
So what actually moves your number up or down? A single-car door with a basic steel panel design is the floor of the range. A double-car door with carriage-house styling, insulated panels, or a wood-look finish lands at the ceiling. Adding a new opener with battery backup and smart connectivity pushes it higher still. On the other side, if your existing door’s tracks and springs are in good shape and only the door itself is being swapped, the labor drops and so does the total. We price the door and the labor separately so you can see exactly where the money is going – that’s the anchor of how we quote, and it’s why homeowners don’t feel like they’re guessing.
One thing worth flagging: the cost of a new door and the cost of a repair are two different conversations. If your current door has a single failed spring or a bent track, you’re likely looking at a repair in the $120 to $340 range rather than a full replacement. We’ll always run the repair math first before recommending a new door. It doesn’t do either of us any good to sell a $2,000 door when a $200 spring is the real problem.
What Affects Garage Door Installation Pricing in Burbank
Pricing isn’t uniform across the city, and it isn’t uniform across door styles. Here’s what actually moves the number for a Burbank install.
- Door size and weight. A single-car door runs 8 to 9 feet wide; a double runs 16 feet. More width means heavier springs, heavier tracks, and more labor. The cost difference between the two is usually several hundred dollars.
- Door material and insulation. Basic steel panel doors sit at the low end. Insulated steel, wood-look composite, and carriage-style doors sit at the high end. Burbank’s inland heat means an insulated door earns its cost back in comfort and energy, but it does raise the upfront price.
- Whether you’re adding an opener. Opener installation is $250 to $550 on top of the door. If your old opener still works and you’re keeping it, that’s real savings. We’ll test it and tell you honestly whether it’s worth keeping.
- Track and spring condition. A new door needs tracks that are square and springs rated for the door’s weight. Reusing old, bent tracks is false economy – it usually shows up as a door that binds within a year. New tracks and springs are part of a proper install.
- Opening condition and headroom. Older Burbank garages, especially the small detached ones behind homes built in the 1940s and 1950s, sometimes have low headroom or non-standard opening heights. Those jobs need custom hardware, which adds labor.
- Permits and disposal. A structural change to the opening may require a permit through the City of Burbank, and hauling away the old door is its own cost. We’ll tell you upfront whether your job needs a permit and build it into the quote.
Burbank’s climate matters here too, though in a quieter way than most homeowners expect. The valley heat and the seasonal dry-to-damp swings do a number on wood-look and wood doors over time, which is one reason steel and composite are so common in the city. If you’re installing a wood door, we’ll talk through finish and sealing before you commit, because an unsealed wood door in this climate will start to move and swell within a few summers framing. For most homes, a well-sealed steel or composite door holds up with far less fuss.
How to Save on Garage Door Installation
There’s no magic discount on a new door, but there are real ways to keep the total down without cutting corners on the parts that matter.
- Get the free estimate first. We measure the opening, check the existing tracks and springs, and give you a written number before any work starts. Call (833) 589-9142 and we’ll schedule it. You can’t compare quotes you never got.
- Keep a working opener. If your current opener is in good shape, a new door doesn’t require a new opener. We test it, and if it’s fine, we’ll say so. That’s $250 to $550 you keep.
- Repair before you replace. If only a panel is damaged, a panel replacement runs $250 to $500 versus a full door. We’ll run the repair math first, every time.
- Choose a simpler door style. A basic steel panel door performs well and costs a fraction of a carriage-house door. You can add upgrades later without redoing the install.
- Bundle door and opener. If you do need both, doing them in one visit saves on labor and trip charges. The total lands lower than two separate service calls.
One shortcut we won’t recommend: skipping the springs and reusing the old ones to save money. Garage door springs are under real tension and are one of the most dangerous parts of the system to handle. A door that’s balanced on tired springs will wear out its opener and its tracks. If your springs are near the end of their life, we replace them as part of the install. That’s $180 to $340 you’d spend eventually anyway, and doing it now protects the door you just paid for.
If you’re weighing installation against repair more broadly, our Garage Door Installation in Burbank page walks through the full process, from measurement to final balance, so you know what a proper install actually involves.
FAQs – Garage Door Installation Cost
How much does a new garage door cost installed in Burbank?
A new garage door installed in Burbank runs $700 to $2,200. Single-car doors sit near $700 to $1,200; double-car doors with premium panels and an opener land near the top of the range. Call (833) 589-9142 for a free estimate on your exact opening.
Is it cheaper to repair a garage door or replace it?
It’s almost always cheaper to repair if the door itself is sound – a spring repair is $180 to $340, a cable repair $130 to $250, and a panel swap $250 to $500, versus $700 to $2,200 for a new door. Replace only when the door is structurally failing, badly rusted through, or the repair cost starts approaching half the replacement cost. We’ll give you the honest number either way – call (833) 589-9142.
How much does garage door opener installation cost in Burbank?
Opener installation runs $250 to $550 in Burbank, including the unit and labor. Belt drives and smarter openers with battery backup sit near the higher end. If your existing opener still works, you don’t have to replace it when you install a new door – we’ll test it and let you know. Call (833) 589-9142 to schedule.
Can you install a new garage door the same day?
Sometimes, yes, depending on door size, style, and available stock. Standard single doors are the most likely to go in the same day; custom-sized doors and special-order panels need lead time. The fastest way to know is to call (833) 589-9142 – we’ll check stock and give you a real date, not a maybe.
Do I need a permit to install a new garage door in Burbank?
Like-for-like replacement usually doesn’t require a permit. Changes to the opening itself – widening it, changing the header, altering the structure – generally do, through the City of Burbank. We’ll tell you upfront whether your job crosses that line and build any permit cost into the quote, so there are no surprises. Call (833) 589-9142 with your address and we can advise.
Why Burbank Homeowners Call Anchor
We install and service every major brand – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so whether your door is a Clopay carriage house or a builder-grade steel panel, we know the system. We diagnose by how the door actually moves and sounds, not just by the manual, because that’s what catches the problem before it becomes a $2,000 door replacement. Installation, repair, and opener repair all live under one name here, so you’re not juggling three contractors for one job. Steady, start to finish – that’s the whole point of the name.
Getting a real number for your door takes one call and a short visit. We’ll measure, check the existing hardware, and hand you a written estimate with the door price and labor broken out separately. No pressure, no upselling a door you don’t need. Call (833) 589-9142 for your free Burbank estimate today.
Pricing reflects the Burbank market as of 2026. Anchor Garage Door Repair offers free estimates – call (833) 589-9142.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Vivian Wong"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
- Alicia Whitfield"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Ruben Herrera